304L Stainless Steel Plate
304/304L Stainless Steel Sheet/Plate
There are two types of hot rolling and cold rolling according to the manufacturing method, and they are divided into 5 categories according to the structural characteristics of steel types: austenitic type, austenite-ferrite type, ferrite type, martensite type, and precipitation hardening type. It is required to withstand the corrosion of various acids such as oxalic acid, sulfuric acid-ferric sulfate, nitric acid, nitric acid-hydrofluoric acid, sulfuric acid-copper sulfate, phosphoric acid, formic acid, acetic acid, etc. It is widely used in chemical industry, food, medicine, papermaking, petroleum, atomic energy, etc. Industry, as well as various parts for construction, kitchen utensils, tableware, vehicles, household appliances.
The surface of the stainless steel plate is smooth and has high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that does not easily rust, but it is not absolutely not rusty.
Stainless steel plates are divided into hot-rolled and cold-rolled according to the manufacturing method, including thin cold plates with a thickness of 0.02-4 mm and medium-thick plates with a thickness of 4.5-100 mm.
In order to ensure that the mechanical properties such as yield strength, tensile strength, elongation and hardness of various stainless steel plates meet the requirements, the steel plates must undergo annealing, solution treatment, aging treatment and other heat treatments before delivery 05.10 188.8.131.52 special symbols
The corrosion resistance of stainless steel mainly depends on its alloy composition (chromium, nickel, titanium, silicon, aluminum, etc.) and internal structure, and the main role is chromium. Chromium has high chemical stability, can form a passivation film on the surface of steel, isolate the metal from the outside, protect the steel plate from oxidation, and increase the corrosion resistance of the steel plate. After the passivation film is destroyed, the corrosion resistance decreases.
STAINLESS STEEL PLATE 304 304L ASTM A240
304 AND 304L ASTM A240 STAINLESS STEEL PLATE OVERVIEW
304 and 304L ASTM A240 stainless steel plate is a standard 18-8 material – meaning it contains 18% chromium and 8% nickel. 304 Stainless steel plate is one of the most versatile stainless steel materials available. It has excellent forming and welding characteristics. Grades 304 and 304L stainless steel plate is dominant in the manufacture of stainless steel fabrications. 304 stainless steel plate can be braked formed into a variety of components for applications in the industrial, architectural, and transportation sectors. 304L is the low carbon version of 304.
Grades 304 and 304L stainless steel plate is available in coil plates and plate mill plates at Penn Stainless Products. A wide range of plate sizes are available for purchase. We typically stock 304 and 304L stainless steel coil plates in widths including 36”, 48”, 60”, 72” and 2 meters (78.74”). Stainless steel plate coil is typically inventoried in lengths of in 96”, 120”, 144”, and 240”. Non-standard lengths of plate coil can be custom leveled. 304 and 304L plate mill plate is also available for purchase, in widths 48”, 60”, 72” and 2 meters, along with 84”, 96” and 120”. The plates are in 96”, 120”, 144”, and 240” in length but custom lengths are commonly available.
CHEMICAL COMPOSITION OF 304 AND 304L ASTM A240 STAINLESS STEEL PLATE
Although both 304 and 304L stainless steel plate have similar chemical properties, there are a few noticeable differences. To begin, 304 stainless steel plate is comprised of at most 0.08% carbon. 304 stainless steel plate also includes at most 2.0% manganese and 0.75% silicon. it also contains no more than 0.045% phosphorous, 0.03% sulfur and between 18.0% and 20% chromium. 304 stainless steel plate also is made of between 8.0% and 10.5% nickel and at most 0.10% nitrogen. There are some key differences between 304 and 304L stainless steel plate. One of these key characteristics is the amount of carbon. 304 stainless steel plate is comprised of no more than 0.08% carbon while 304L stainless steel plate contains a maximum of 0.03% carbon. The other main difference in chemical composition between these two stainless steel plates grades is the amount of nickel. 304L stainless steel plate can have a maximum of 12.0% nickel while 304 stainless steel plate can only contain up to 10.5%. These are the main differences between the two stainless steel plates. They both contain the same amount of manganese, silicon, phosphorus, sulfur, and nitrogen.
MECHANICAL PROPERTIES OF 304 AND 304L ASTM A240
STAINLESS STEEL PLATE
It is important to understand the mechanical properties of 304 and 304L stainless steel plate, ASTM A240. 304 stainless steel plate has a minimum tensile strength of 75 ksi and a minimum yield strength at 0.2% of 30 ksi. 304 stainless steel plate has an elongation of 40%. This type of stainless steel plate has a maximum Brinell hardness of 201 and a Rockwell B hardness of 92. 304L stainless steel plate has a minimum tensile strength of 70 ksi and a yield strength at 0.2% of 25 ksi. This stainless steel plate also has an elongation of 40%, a maximum hardness of 201 on the Brinell scale and a hardness of 92 on the Rockwell B scale.
PHYSICAL PROPERTIES OF 304 AND 304L ASTM A240 STAINLESS STEEL PLATE
The density of 304 and 304L stainless steel plate is 0.285 Ibm/In3 at 68 ℉. The thermal conductivity of grade 304 and 304L stainless steel plate is 9.4 BTU/ h ft. at 212 ℉ and at 932 ℉ the thermal conductivity is 12.4 BTU/ h ft. The electrical resistivity of 304 and 304L stainless steel plate at 68 ℉ is 28.3in x 10^-6, at 752 ℉ is 39.4in x 10^-6 and at 1,652 ℉ the electrical resistivity of this stainless steel plate is 49.6in x 10^-6. Grades 304 and 304L stainless steel plate have a module of elasticity of 28 psi x 10^6. Both stainless steel plates have a coefficient of thermal expansion of 9.4 in x 10^-6 at 32℉ – 212℉, 10.2 in x 10^-6 at 32℉-1,000℉ and 10.4 in x 10^-6 at 32℉-1,500 ℉. The specific heat of the 304 and 304L stainless steel plate is 0.1200 Btu/IBM at 68℉ to 212℉ and the melting range of 304 and 304L stainless steel plate is from 2,500℉ to 2,590 ℉.
SPECIFICATIONS OF 304 AND 304L ASTM A240 STAINLESS STEEL PLATE
|304 STAINLESS STEEL PLATE||304L STAINLESS STEEL PLATE|
|UNS S30400||UNS S30403|
|ASTM A240||ASTM A240|
|ASTM A666||ASTM A666|
|AMS 5513||AMS 5511|
STAINLESS STEEL PLATE 304 AND 304L ASTM A240 APPLICATIONS & USAGE
There is a wide range of uses for 304 and 304L stainless steel plate. It is used extensively for home and commercial appliances, including use in kitchen benches, sinks, troughs, and frying pans. It can also be used to store and transport chemicals. 304 and 304L stainless steel plate has a wide range of application in the food processing industries as well, including use in equipment, particularly seen in beer brewing, wine making and milk processing. 304 and 304L stainless steel plate is also frequently used in the pharmaceutical, medical, and chemical processing industry. Heat exchangers, architectural trim and molding is also a common place in which 304 and 304L stainless steel plate is used. 304 and 304L stainless steel plate is also frequently used in woven or welded screens for mining, in the petroleum refining process, quarrying and in water filtration systems. This material is also well suited for the automotive and aerospace industries for structural use. 304 and 304L stainless steel plate is also used to produce nuts, bolts, screws, and other fasteners. 304 and 304L stainless steel plate is also used as a construction material in specifically large buildings and is also utilized in the dyeing, textile, and paper industry.
A:We usually accept T/T in advance, L/C for large sum.If you prefer other payments terms, please discuss.
Q2:What is the terms of delivery?
A:EXW, FOB, CIF
Q3:What is the terms of packing?
A:Generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers’ requirements.
Q4:What is your delivery time?
A:Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.
A:Yes, we can send you samples but you may pay the express fees, our MOQ is 1 ton.
A:We accept and support the third-party inspection.We also could issue the warranty to customer to guarantee the quality.
A:Guangzhou or Shenzhen sea port.
A:It’s the best way if you can send us the material, size and surface, so we can produce for u to check the quality.If you still have any confusion, just contact us, we would like to be helpful.